News & Solutions
Splicing sequence of optical cable and pigtail
Splicing sequence of optical cable and pigtail
The sequence of fiber optic cable fusion:1. Strip the optical cable and fix the optical cable into the splice boxWhen fixing multi-bundle tube-layer optical cables, each bundle of tubes should be placed in order to avoid twisting. Insert the optical cable into the splice box, and the steel wire must

03-28

2022
Difference between fiber jumpers and pigtails
Difference between fiber jumpers and pigtails
There are many types of patch cords and pigtails. It is worth noting that fiber pigtails and patch cords are not the same concept.The main difference between fiber optic patch cords and fiber optic pigtails is that only one end of the fiber optic pigtail has an active connector, and both ends

03-18

2022
Application of fumed silica in optical fiber cable
Application of fumed silica in optical fiber cable
In the fiber optic cable manufacturing process, there are usually three ways to prevent water and moisture, that is, inflation, filling with ointment (fiber paste and cable paste) or using dry super absorbent materials.Among them, filling ointment in optical fiber and cable is the most common

03-10

2022
The role of FRP fiber optic cable strengthening core in optical cable
The role of FRP fiber optic cable strengthening core in optical cable
Material is the fiber optic cable, no good material can not make good quality fiber optic cable.The structural strength of fiber optic cable reinforcement core is an important index of fiber optic cable mechanical properties.Fiber optic cable strengthening core plays a vital role in the

03-10

2022
Troubleshooting of Optical Cable Lines
Troubleshooting of Optical Cable Lines
Troubleshooting method:(1) There is a total resistance fault that can be replaced by an optical cable in the same route.(2) For all-block faults that have no optical fiber that can be replaced, the emergency plan shall be implemented to rush to replace the fault or the direct repair of the obstacle

03-05

2022
Optical cable overhead construction technology
Optical cable overhead construction technology
When the fiber is pulled beyond its tensile limit, it will break. A reinforcing member is added to the structure of the optical cable, and the tensile strength required by the optical cable is mainly borne by the reinforcing member. During the construction process, the traction force cannot exceed t

02-22

2022
Copyright © 2008-2022 All Rights Reserved. 湘ICP备20006636号-2