News & Solutions
Application of fumed silica in optical fiber cable
Application of fumed silica in optical fiber cable
In the fiber optic cable manufacturing process, there are usually three ways to prevent water and moisture, that is, inflation, filling with ointment (fiber paste and cable paste) or using dry super absorbent materials.Among them, filling ointment in optical fiber and cable is the most common

03-10

2022
The role of FRP fiber optic cable strengthening core in optical cable
The role of FRP fiber optic cable strengthening core in optical cable
Material is the fiber optic cable, no good material can not make good quality fiber optic cable.The structural strength of fiber optic cable reinforcement core is an important index of fiber optic cable mechanical properties.Fiber optic cable strengthening core plays a vital role in the

03-10

2022
Troubleshooting of Optical Cable Lines
Troubleshooting of Optical Cable Lines
Troubleshooting method:(1) There is a total resistance fault that can be replaced by an optical cable in the same route.(2) For all-block faults that have no optical fiber that can be replaced, the emergency plan shall be implemented to rush to replace the fault or the direct repair of the obstacle

03-05

2022
Fiber Optic Distribution Box
Fiber Optic Distribution Box
Fiber Optic Distribution Box/ Fiber access terminal box (FAT)/optical termination box (OTB) Fiber termination box (FTB)are a compact fiber management box used for FTTH application. is widely used in FTTx cabling for both fiber cabling and cable management.FTTH Terminal Box Fiber Optic Distribu

02-23

2022
Optical cable overhead construction technology
Optical cable overhead construction technology
When the fiber is pulled beyond its tensile limit, it will break. A reinforcing member is added to the structure of the optical cable, and the tensile strength required by the optical cable is mainly borne by the reinforcing member. During the construction process, the traction force cannot exceed t

02-22

2022
Fiber Patch Cord & Cable Assembly
Fiber Patch Cord & Cable Assembly
Fiber Patch Cord & Cable Assembly, often called fiber patch cable, fiber jumper, or fiber patch lead, is a length of fiber cable that terminated with fiber optic connectors (LC, SC, MTRJ, ST and etc.) at each end.The connectors allow fiber optic patch cord to be rapidly connected to an optical s

02-19

2022
Copyright © 2008-2022 All Rights Reserved.